Horizontal Machining Center
Horizontal Machining Center HMC-500
| 分享到： |  |
| SAMPLE APPLICATION | ||
 |
 |
 |
| SPECIFICATION | ||
| Item/Model No. | Unit | HMC-500 |
| Travel | ||
| X/Y/Z | mm (inch) | 650/560/560 (25.59/22.05/22.05) |
| Table/Auto Pallet Changer | ||
| Dimension | mm (inch) | 500×500 (19.69×19.69) |
| Min. Indexing | 0.001° or 1° (OPT.) | |
| Bolt Hole | M16×100 | |
| Max. Table Loading | kg (lb.) | 400 (880) |
| Spindle | ||
| Spindle Taper | BT40 | |
| Max. Spindle Speed | rpm | Belt 8,000 |
| Spindle Motor | kW (HP) | 11/15 (15/20) |
| Spindle Nose to Table Center | mm (inch) | 100 (3.94) |
| Spindle Center to Table Surface | mm (inch) | 50 (1.97) |
| Feedrate | ||
| Cutting Feedrate | m/min (ipm) | 1~10 (0.04~393.7) |
| Rapid Traverse X/Y/Z | m/min (ipm) | 30/24/30 (1,181.1/944.88/1,181.1) |
| ATC | ||
| Tool Capacity | pcs | BT40, Chain 40 |
| Max. Tool Diameter | mm (inch) | ø76 (ø2.99) |
| Max. Tool Length | mm (inch) | 300 (11.81) |
| Max. Tool Weight | kg (lb.) | 8 (17.6) |
| General Information | ||
| Electrical Power Capacity | KVA | 40 |
| Dimension (W×D×H) | mm (inch) | 3,080×5,450×2,450 (121.26×214.57×96.46) |
| Machine Weight (Net) | kg (lb.) | 6,800 (14,960) |
●STANDARD EQUIPMENT
1. Full Enclosure Splash Guard
2. X, Y and Z Roller Linear Guide Ways
3. Telescopic Cover on Three Axes
4. Cutting Coolant Unit
5. Auto Lubrication System
6. Coolant Through Axial Screws
7. Air Blast Through Spindle Taper
8. Spindle Oil Chiller
9. Coolant Flushing System
10. Heat Exchanger in Electric Cabinet
11. Spiral Type Chip Conveyor (Rear) with Trolley
12. Hydraulic Counterweight Balance System on Y-axis
13. Servo Brake System on Y-axis
14. High Pressure Coolant Gun and Air Gun
15. Work Lamp and Alarm Indicator
16. Service Tools and Leveling Bolts
17. Manual Pulse Generator (Hand-wheel)
18. Mechanical and Electrical Operation Manuals
19. Precision Check Data
20. One Year Warranty for Machine under Normal Operation (From the Date on Bill of Lading)
21. Warranty of Controller depend on Buyer's Location
●OPTIONAL ACCESSORIES
1. Transformer
* KAMIOKA reserves the right to change design, color or spec without prior notice.
